(+34) 952 86 04 46 - 620 74 59 71 info@polytechnol.es

Geoobolochka “GeoFRAM” injectable

Description

Geoobolochka “GeoFRAM” injectable

There are 5 types depending on their form and place of application:

Its main objective is to compensate the sliding force that arises in the upper layer of embankments, as well as the impact caused by floods and water superficial on natural slopes.

It is used on flood slopes.

Geosynthetic material reinforced with a high tenacity geosynthetic mesh that is filled with concrete forming a unique structure, with predetermined dimensions and configuration.
Its main objective is to compensate the sliding force that arises in the upper layer of the embankment, as well as the impact caused by floods and by surface and filtered water on the natural slopes of the mounds.
It is used on flood slopes and high inclination.

Geosynthetic material that is filled with concrete forming a light structure, with predetermined dimensions and configuration.

Its main objective is to cover the embankment, protect the slope from water and wind erosion. The existing fabric between the concrete elements performs the function of reverse filtration, favouring the exit of water and avoiding leaching.

Geosynthetic material that is filled with concrete forming a light structure, with predetermined dimensions and configuration.
Its main objective is to protect the surface layer of the embankment from temperature, surface water, and water and wind erosion, favouring the development of the root system of herbaceous plants.
It is used in non-flooding embankments with an inclination of no more than 1-1.5m and with a height of up to 6m.

Combination between geosynthetic fabric and polymeric geogrid, which is filled with concrete forming a light structure, with predetermined dimensions and configuration.
Its main objective is to protect the top layer of the embankment from temperature, precipitation, water and wind erosion, as well as to prevent leaching and deposition of the soil. It favours the formation of the vegetative layer, allowing the development of the root system of herbaceous plants.
It is used in non-flooding embankments.

Characteristics
Geoobolochka “GeoFRAM” injectable is a geosynthetic product made of 100% polyester that is filled with concrete forming a unique and / or light structure, which works as lost formwork.
It has excellent physical and mechanical characteristics: resistant to UV radiation, salt water and other aggressive environments and sudden changes in temperature. It is durable and environmentally friendly.
It is manufactured in two colours: white and grey.
Functions
  • It guarantees the safe and durable protection of hydraulic and industrial infrastructures;
  • Prevents the weakening of the land in coastal and fluvial lines due to the effects of wind and water erosion;
  • Strengthening of slopes and hillsides with complicated relief by restraining erosion.
Application

It has a wide scope of applications, used both in hydraulic infrastructures, in reinforcements and stabilization of coastal and fluvial lines to protect from erosion, and in geotechnics.

Advantages
  • Strengthening of river beds, dams, reservoirs, canals, etc .;
  • Protection of docks, breakwaters and seawalls;
  • Erosion control structures on slopes and hillsides with complicated relief in order to prevent its displacement;
  • Protection and sealing of pipes;
  •  Protection of irrigation channels

Geoobolochka “GeoFRAM” rellena con hormigón en un talud.